IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)
IEEE 802.11i Support WPA-Personal, WPA2-Personal
ARM Cortex M3 class processor with on-chip Flash and SRAM
1MB Flash and 128 KB SRAM
MS Windows-based DeviceInstaller
MS Windows-based Com Port Redirector
Low power consumption of approximately 20A standby
40-pin Board-to-Board SMT Connector
Operating Temp: -40 to +85 C
Storage Temp: -40 to +85 C
Relative Humidity: 0% to 90% non-condensing
FCC Class B, UL and EN EMC
Dimensions: 24mm (L) x 16.5mm (W) x 5.64mm (H)
IEEE 802.11 d/h/i/j/k/w/r
u.FL connector for external antenna
Two Serial CMOS Ports (3.3V, 5V tolerant)
Flow control XON/XOFF, RTS/CTS (SPort 1 only)
Lantronix tunneling application
ModBus TCP, Modbus ASCII, Modbus RTU
Dual Serial Port, SPI, USB 2.0 (device)
TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1, TFTP
Soft Access Point with DHCP Server
Lantronix SmartRoam Technology continually tracks Wi-Fi signal strength within range, along with preauthentication and caching resulting in smooth and automatic transition to access points without delay
QuickConnect: Dynamic Profiles facilitate easy and rapid connections to access points
Web Server - Landing Page
CLI (Serial Monitor Port), Telnet
XML import and Export (XCR)
Field upgradable firmware (OTA)