Low Power, High Speed, 802.11b/g/n Module w/ PCB Antenna 40 pin

Manufacturer:
MFG Part #:

700-0082

Part #:
GS2100MIP
Family:
Availability:
In Stock
RoHS Status:
Unit Price:$14.50
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The GS2100M module provides a low cost, high speed serial to Wi-Fi connection to an embedded design built on an 8/16/32-bit microcontroller, achieving up to 40 Mbps throughput over an SDIO interface.
   
The GS2100M is an ideal solution for organizations with limited Wi- Fi or RF expertise or for those seeking faster time to market, as it reduces RF design time and removes the burden of testing and certification. The module is IEEE 802.11b/g/n compliant, and meets worldwide regulatory and Wi-Fi Alliance certification requirements.
   
The module runs the full Wi-Fi and TCP/IP networking stacks, completely offloading the host microcontroller. It supports a complete suite of security protocols, also without tasking the host microcontroller, including WPA/WPA2-Enteprise and Personal security modes, legacy WEP encryption, and upper layer security protocols such as TLS/SS and HTTPs. Alternatively, it can be run self-contained without a host.
  
For ease of provisioning, the module can be set up simply and easily from a smartphone or laptop through the innovative Limited AP mode or with Wi-Fi Protected Setup (WPS).
   
The module is single sided with castellation on the edges for the I/O connections for soldering down on the product’s baseboard.
    
The GS2100M has extended range with industry leading receiver sensitivity. It is available with a u.FL connector to add an external antenna for max performance or a PCB antenna for convenience while saving space. It is US/Canada (FCC /IC), Europe (ETSI) and Japan (TELEC) certified.
   
GS2100M Module Block Diagram
 

Features

Back to top
Enables SEP 2.0 Smart Energy Profiles
High resolution sensing and energy measurement
Adds low power, high speed Wi-Fi and Internet connectivity to any device with a microcontroller and serial host interface
Certified module reduces development time, testing and certification, accelerating time to market
Full offload solution minimizes load on host processor
Easy smartphone provisioning with Limited AP or Wi-Fi Protected Set-up (WPS)
Ultra low power consumption through dynamic power management modes - Standby, Sleep, Deep Sleep
Extended range
SEP 2.0 Smart Energy Device Types:
Smart Thermostat
Load Control
3 16-bit Sigma-Delta ADCs for sensors and measurement
IEEE 802.11 b/g/n connectivity with PHY rates up to 72 Mbps
UART, SPI, SDIO interface to microcontroller
Throughput (typical)
40 Mbps on SDIO
30 Mbps on SPI (master)
12 Mbps on SPI (slave)
1 Mbps on UART
Extensive networking stack and services
Security
802.11i
WPA/2Personal and Enterprise
Legacy WEP
TLS
 

Documents

Back to top
GainSpan GS2100M Product Brief

Previously Viewed Products