64kbit FRAM with I2C serial interface, 5V - SOP8 T&R

MFG Part #:


Part #:
Contact Symmetry For Lead Time
Unit Price:$1.12
Minumum Qty: 1500
Need a lower quantity?
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The MB85RC64V is an FRAM (Ferroelectric Random Access Memory) chip in a configuration of 8,192 words x 8 bits, using the ferroelectric process and silicon gate CMOS process technologies for forming the nonvolatile memory cells.

Unlike SRAM, the MB85RC64V is able to retain data without using a data backup battery.

The read/write endurance of the nonvolatile memory cells used for the MB85RC64V has improved to be at least 1012 cycles, significantly outperforming other nonvolatile memory products in the number.

The MB85RC64V does not need a pollingsequence after writing to the memory such as the case of Flash memory or E²PROM.

Fujitsu MB85RC64V_001.jpg

Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized Fujitsu distributor.


Back to top
Bit configuration : 8,192 words x 8 bits
Two-wire serial interface : Fully controllable by two ports: serial clock (SCL) and serial data (SDA).
Operating frequency : 1 MHz (Max)
Read/write endurance : 1012 times / byte
Data retention : 10 years (+ 85 C), 95 years (+ 55 C), over 200 years (+ 35 C)
Operating power supply voltage : 3.0 V to 5.5 V
Low-power consumption : Operating power supply current 90 A (Typ @1 MHz)
- Standby current 5 A (Typ)
Operation ambient temperature range : -40 C to + 85 C
Package : 8-pin plastic SOP (FPT-8P-M02)
- RoHS compliant

Previously Viewed Products