4kbit FRAM with I2C serial interface, 5V - SOP8 T&R

Manufacturer:
MFG Part #:

MB85RC04VPNF-G-JNERE1

Part #:
MB85RC04VPNF-G-JNERE1
Availability:
Short Lead Time
RoHS Status:
Unit Price:$0.46
Qty:
Minumum Qty: 1500
Need a lower quantity?
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The Fujitsu MB85RC04V is a 4K Bit FRAM (Ferroelectric Random Access Memory) chip in a configuration of 512 words ×8 bits, using the ferroelectric process and silicon gate CMOS process technologies for forming the nonvolatile memory cells.

Unlike SRAM, the MB85RC04V is able to retain data without using a data backup battery.

The read/write endurance of the nonvolatile memory cells used for the MB85RC04V has improved to be at least 1012 cycles, significantly outperforming other nonvolatile memory products in the number.

The MB85RC04V does not need a polling sequence after writing tothe memory such as the case of Flash
memory or E²PROM.



Fujitsu mb85rc04v_001.jpg

Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized Fujitsu distributor.
 

Features

Back to top
Bit configuration: 4K Bit (512 words 8)
Two-wire serial interface : Fully controllable by two ports: serial clock (SCL) and serial data (SDA).
Operating frequency : 1 MHz (Max)
Read/write endurance : 10^12 times / byte
Data retention : 10 years ( +85 C), 95 years ( +55 C), over 200 years ( +35 C)
Operating power supply voltage : 3.0 V to 5.5 V
Low-power consumption : Operating power supply current 90 μA (Typ @1 MHz)
- Standby current 5 μA (Typ)
Operation ambient temperature range
: -40 C to +85 C
Package : 8-pin plastic SOP (FPT-8P-M02)
- RoHS compliant
 

Previously Viewed Products