1Mbit FRAM with SPI serial interface - SOP8 T&R

Manufacturer:
MFG Part #:

MB85RS1MTPNF-G-JNERE1

Part #:
MB85RS1MTPNF-G-JNERE1
Availability:
Short Lead Time
RoHS Status:
Unit Price:$5.45
Qty:
Minumum Qty: 1500

Need a lower quantity?
Ask a Question
Call Me
Email This Page
 
 

Product Information

MB85RS1MT is a FRAM (Ferroelectric Random Access Memory) chip in a configuration of 131,072 words ×8 bits, using the ferroelectric process and silicon gate CMOS process technologies for forming the nonvolatile memory cells.

MB85RS1MT adopts the Serial Peripheral Interface (SPI).

The MB85RS1MT is able to retain data without using a back-up battery, as is needed for SRAM.

The memory cells used in the MB85RS1MT can be used for 1013 read/write operations, which is a significant improvement over the number of read and write operations supported by Flash memory and E²PROM. MB85RS1MT does not take long time to write data like Flash memories or E²PROM, and MB85RS1MT takes no wait time.

Fujitsu MB85RS1MT_001.jpg

Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized Fujitsu distributor.
 

Features

Bit configuration : 131,072 words 8 bits
Serial Peripheral Interface : SPI (Serial Peripheral Interface)
- Correspondent to SPI mode 0 (0, 0) and mode 3 (1, 1)
Operating frequency : 1.8 V to 2.7 V, 25 MHz (Max) 2.7 V to 3.6 V, 30 MHz (Max)
- For FSTRD command 2.7 V to 3.6 V, 40 MHz (Max)
High endurance : 1013 times / byte
Data retention : 10 years (+85 C)
Operating power supply voltage : 1.8 V to 3.6 V
Low power consumption : Operating power supply current 9.5 mA (Max@30 MHz)
- Standby current 120 A (Max)
- Sleep current 10 A (Max)
Operation ambient temperature range : -40 C to +85 C
Package : 8-pin plastic SOP (FPT-8P-M02)
- RoHS compliant
 

Previously Viewed Products

1Mbit FRAM with SPI serial interface - SOP8 T&R