The XC6101~XC6105, XC6111~XC6115 series are groups of high-precision, low current consumption voltage detectors with manual reset input function and watchdog functions incorporating CMOS process technology. The series consist of a reference voltage source, delay circuit, comparator, and output driver.
With the built-in delay circuit, the XC6101 ~ XC6105, XC6111 ~ XC6115 series'ICs do not require any external components to output signals with release delay time. Moreover, with the manual reset function, reset can be asserted at any time.
The ICs produce two types of output; VDFL (low when detected) and VDFH (high when detected).
On the XC6101 ~ XC6105, XC6111 ~ XC6115 series' ICs, the WD pin can be left open if the watchdog function is not used.
Whenever the watchdog pin is opened, the internal counter clears before the watchdog timeout occurs.
Moreover, since the manual reset pin is internally pulled up to the VIN pin voltage level, the ICs can be used with the manual reset pin left unconnected if the pin is unused.
The detect voltages are internally fixed 1.6V ~ 5.0V in increments of 100mV, using laser trimming technology.
Six watchdog timeout period settings are available in a range from 6.25ms to 1.6s.
Seven release delay time 1 are available in a range from 3.13ms to 1.6s.
• Microprocessor reset circuits
• Memory battery backup circuits
• System power-on reset circuits
• Power failure detection
Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized Telit distributor.