ZigBee® USB stick with ETRX357 Module

Manufacturer:
MFG Part #:

ETRX357USB

Part #:
ETRX357USB
Family:
Availability:
In Stock
Unit Price:$42.96
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The Telegesis ETRX3USB ZigBee USB Stick is a high performance, low power 2.4GHz ISM band transceiver in a USB Stick form factor. Based on Embers EM357, It complies with the IEEE 802.15.4 standard, providing a cost effective method of adding ZigBee capability to any device which employs USB. For faster production development the device carries the Telegesis AT Command line interface which allows quick integration of meshing radio technology without complex programming or RF design experience. It is effectively an RS232 to USB bridge connected to an ETRX3 Series ZigBee module. 
   
The supplied Windows drivers create a virtual COM Port, so that the command line of the ETRX3 series module can be accessed via any terminal software application.
   
When using Windows® the Telegesis Terminal application can be used as described in the ETRX357 Development Kit manual.
  
Supported Operating Systems:
  • Windows 98SE
  • Windows XP/Vista/7
  • Windows 2000
  • Windows CE *
  • MAC OS-9
  • MAC OS-X *
  • Linux *
* drivers for these systems are available from Silicon Labs. The bridge chip is a CP2102 with Vendor ID 0x10C4 and Product ID 0x8293.
 

Features

Back to top
Activity LED
Plug on side allows access to programming connector
16 channels in the 2,4GHz ISM Band
Integrated omni-directional antenna
Up to 150m range
USB bus powered
COM port interface (virtual com port in Windows
+3dBm/+20dBm typical output power (+8dBm in boost mode) ETRX3USB/LRS
Low power sleep mode of 1.6mW
Operating Temperature range -40C to +85C
 

Documents

Back to top
Telegesis AT Command set Manual
Telegesis Product Brief
Telegesis Product Manual
Telegesis USB User Guide

Previously Viewed Products