RS9113-NBZ-D1W-EVB Eval Kit

MFG Part #:


Part #:
Short Lead Time
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.
Ask a Question
Call Me
Email This Page

Product Information

Back to top
M2MCombo RS9113 is Redpine Signals’ ultra-low-power, single spatial stream, dual-band 802.11n + BT4.0 + ZigBee® Convergence SoC. The RS9113 chipset provides low-cost CMOS integration of a multi-threaded MAC processor, baseband digital signal processing, analog front-end, crystal oscillator, calibration OTP and coupled with a dual-band RF transceiver and dual-band high-power amplifiers provides a cost-effective solution targeting low-power and high QoS wireless applications.

M2MCombo leverages and improves upon Redpine’s proven low power innovations from Lite-Fi® products and provides BT4.0 and ZigBee® convergence solution for integration into mobile and M2M communication devices. With its embedded four-threaded processor and on-chip ROM and RAM, this chipset enables integration into zero host load applications with capability to run Wi-Fi security supplicant and TCP/IP on-chip thus setting a new benchmark for the “internet-of-things” market. With advanced ultra-low-power PMU, integrated analog peripherals and support for a variety of digital peripherals – RS9113 enables very low-cost implementations for wireless embedded and M2M applications.


• Smart-phones, Tablets and eReaders
• Cameras and Camcorders
• VoWi-Fi phones
• Gaming Consoles
• Wireless Sensor and RTLS Tags
• Smart Meters and In-home-devices (Displays/Thermostats)
• Medical Devices
• Other M2M applications

Symmetry Electronics (and its e-commerce division: is an authorized Redpine Signals distributor.


Back to top
Ultra-low-power, low-cost and high-throughput 1 Tx 1 Rx Dual-band 802.11n + BT4.0 (Bluetooth LE dual-mode) + ZigBee (802.15.4-2006)
Data rates up to 150 Mbps using 1-Spatial Stream 802.11n MCS-7, 40MHz bandwidth mode for high user throughput
Hardware Assisted Radar-detection for compliance to FCC and ETSI norms, enabling usage of more channels in the 5GHz band
High performance Bluetooth receiver with -95dBm Rx sensitivity
Support for Bluetooth Transmit power class-1
High performance Zigbee receiver with -101dBm Rx sensitivity
Support for multiple Zigbee output powers up to +20dBm
Innovative coexistence algorithms for optimum throughput of Wi-Fi and collocated Bluetooth and Zigbee modems
Integrated Ultra-low-power subsystem with <2uA watch-dog mode and <30uA standby mode.
Integrated ThreadArch Four-threaded processor with on chip memory for achieving high-throughputs with low-host overhead and customer specific differentiations
On-chip processing and memory enables option to offload Wi-Fi security supplicant and TCP/IP stack enabling zero-host load and extreme ease of integration for the internet-of-things
Advanced power management techniques adaptively minimize system power in various application profiles.
High level of CMOS integration to minimize RBOM (E.g., On-chip OTP)
Rich set of built-in analog and digital peripherals for enabling low-host load and zero-host applications
Support for multiple host interfaces to allow maximum flexibility for the system integrator. Host interfaces supported are USB 2.0, SDIO, SPI and UART

Previously Viewed Products

RS9113-NBZ-D1W-EVB Eval Kit
Part #: RS9113-NBZ-D1W-EVB
RS9113-NBZ-D1W-EVB Eval Kit