RS9113 single band (2.4 GHz) evaluation board for n-Link, Connect-io-n and WISeConnect product families

Manufacturer:
MFG Part #:

RS9113-NBZ-S1X-EVB

Part #:
RS9113-NBZ-S1X-EVB
Availability:
In Stock
RoHS Status:
 
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The RS9113 WiSeConnect module is based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + Bluetooth (BT4.0) + ZigBee (ZB) Convergence SoC. The RS9113 module is a complete IEEE 802.11 a/b/g/n, ZB and BT wireless device server that provides a wireless interface to any equipment with a SDIO, UART, SPI or USB interface. The RS9113 module integrates a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband digital signal processor, analog front-end, crystal oscillator, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI Flash thus providing a fully-integrated solution for embedded wireless applications and all WLAN, BT and ZB protocols and networking stack functionality in embedded firmware to make a fully self-contained wireless solution for a variety of applications. The module integrates an antenna and a U.FL connector for external antenna with an option to select either one of them. The M2MCombo (RS9113) chips and modules leverage and improve upon Redpine’s proven low power innovations from Lite-FiTM products (RS9110) and provide WLAN 802.11n, BT4.0 and ZB convergence solution for integration into mobile and M2M communication devices.


Applications:

• Smart phones, Tablets and e-Readers
• VoWi-Fi phones
• Smart Meters and in-home displays
• Industrial automation and telemetry
• MP3 music and MP4 video players
• Medical Devices
• Industrial monitoring and control
• Home and building automation
• Wi-Fi-BT gateway device
• Wi-Fi-ZB gateway device
• Wireless headset

Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized Redpine Signals distributor.
 

Features

Back to top
RS9113 WiSeConnect module integrates WLAN, BT 4.0 and ZigBee functions.
WLAN: Compliant to IEEE 802.11 a/b/g/n with dual band support.
Bluetooth: Compliant to dual-mode Bluetooth V4.0
ZigBee: Compliant to IEEE 802.15.4
Supports both 20MHz and 40MHz bandwidth.
WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm.
Support for Bluetooth Transmit power class-1 with integrated PA and high performance Bluetooth receiver with -94dBm Rx sensitivity.
Support for multiple ZigBee output powers up to +19dBm with integrated PA and high perform ance ZigBee receiver with -100dBm Rx sensitivity.
U.FL connector for external antenna connection is selectable.
Dual external antenna (diversity supported).
Embedded WLAN stack, ZigBee stack, BT stack, TCP/IP stack, HTTP server.
Support for Embedded Wi-Fi Direct, Enterprise Security, Client mode and Access Point mode.
BT profile support for GAP,SDN,PAN,SPP,IAP,HFP 1.5,GATT,ATTR,IAP,A2DP,ACRP.
Supports for ZigBee profiles like Home-automation and Smart Energy
Supports SPI, UART, USB, SDIO host interfaces.
Can operate with 8-bit microcontrollers with no OS.
Single supply 3.0 to 3.6 V operation.