Isolated analog amplifier

Manufacturer:
MFG Part #:

Si8920AC-IPR

Part #:
SI8920AC-IPR
Availability:
Short Lead Time
RoHS Status:
Unit Price:$3.40
Qty:
Minumum Qty: 500
Need a lower quantity?
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The Si8920 is a galvanically isolated analog amplifier. The low-voltage differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system. The output is a differential analog signal amplified by either 8.1x or 16.2x.

The very low signal delay of the Si8920 allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range. Exceptionally high common-mode transient immunity means that the Si8920 delivers accurate measurements even in the presence of high-power switching as is found in motor drive systems and inverters.

The Si8920 isolated amplifier utilizes Silicon Labs’ proprietary isolation technology. It supports up to 5.0 kVrms withstand voltage per UL1577. This technology enables higher performance, reduced variation with temperature and age, tighter part-to-part matching, and longer lifetimes compared to other isolation technologies.

Symmetry Electronics is an authorized Silicon Labs distributor.
 

Features

Back to top
Low voltage differential input
100 mV and 200 mV options
Low signal delay: 0.75 s
Input offset: 0.2 mV
Gain error: <0.5%
Excellent drift specifications
1 V/C offset drift
60 ppm/C gain drift
Nonlinearity: 0.1% full-scale
Low noise: 0.10 mVrms over 100 kHz bandwidth
High common-mode transient immunity: 75 kV/s
Compact packages
16-pin wide body SOIC
8-pin surface mount DIP
40 to 125 C
AEC-Q100
 

Documents

Back to top

Previously Viewed Products

Isolated analog amplifier
Part #: Si8920AC-IPR
Isolated analog amplifier