Quad 802.3at PoE PSE Controller

Manufacturer:
MFG Part #:

Si3454-B01-IM

Part #:
SI3454-B01-IM
Availability:
In Stock
RoHS Status:
Unit Price:$5.51
Qty:
Minumum Qty: 406
Need a lower quantity?
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The Si3454 is a fully-programmable, four-port power management controller for IEEE 802.3 compliant Power Sourcing Equipment (PSE). Designed for use in PSE endpoint (switches), the Si3454 integrates four independent ports, each with IEEE-required powered device (PD) detection and classification functionality. In addition, the Si3454 features a fully-programmable architecture that enables powered device (PD) disconnect using a dc sense algorithm, a robust multipoint detection algorithm, software-configurable per-port current and voltage monitoring, and programmable current limits to support the IEEE 802.3at standard. Intelligent protection circuitry includes input under-voltage detection, output current limit, and short-circuit protection. The Si3454 operates by host processor control through a three-wire, I2C-compatible serial interface. Independent serial data input and output pins enable high-voltage isolation through external isolators. An interrupt pin is used to alert the host processor of various status and fault conditions. The device also supports a pin-selectable AUTO mode for autonomous operation, without the need for a host processor. The Si3454 also features an on-chip dc-dc converter for creating the digital voltage rail from the PoE voltage, thus enabling single-rail power operation.

Applications
• IEEE Power Sourcing Equipment (PSE)
• Power over Ethernet (PoE) Switches
• IP Phone Systems
• Smartgrid Switches
• Ruggedized and Industrial Switches

Symmetry Electronics is an authorized Silicon Labs distributor.
 

Features

Back to top
Quad-Port Power Sourcing Equipment (PSE) controller
IEEE 802.3at Type I and II compliant
Port priority shutdown control
Adds enhanced features for maximum design flexibility:
Per-port current and voltage monitoring
PoE Plus support with programmable current limits
Multi-point detection
Programmable power MOSFET gate drive control
Configurable watchdog timer enables failsafe operation
Maskable interrupt pin
Comprehensive fault protection circuitry includes:
Power undervoltage lockout
Output current limit and shortcircuit protection
Thermal overload detection
Supports pin-selectable AUTO mode
Extended operating temp range: 40 to +85 C
5x7 mm 38-pin QFN package (RoHS-compliant)
On-chip dc-dc converter enables single-rail power operation
 

Previously Viewed Products

SI3454-B01-IM
Part #: SI3454-B01-IM
SI3454-B01-IM