64MHz ARM Cortex-M4F, 2.4GHz multi-protocol SoC

Manufacturer:
MFG Part #:

NRF52832-QFAA-T-BXO

Part #:
NRF52832-QFAA-T-BXO
Availability:
Short Lead Time
RoHS Status:
Unit Price:$2.83
Qty:
Minumum Qty: 1

Ask a Question
Call Me
Email This Page
 
 

Product Information

The Nordic nRF52832 is a powerful multiprotocol single chip solutions for ULP wireless applications. It incorporates Nordic’s latest best-inclass performance radio transceiver, an ARM® Cortex™ M4F CPU and 512kB flash and 64kB RAM memory. The nRF52 supports Bluetooth® Smart (formerly known as Bluetooth low energy), ANT and 2.4GHz proprietary protocol stacks. The device also has a NFC-A tag interface for OOB pairing.
*The NRF52832-QFAA-R will become available in December 2015.
   
  
The nRF52832 uses the 32-bit ARM Cortex M4F MCU, together with extensive flash availability, 512kB in total with 400kB available for application development. Code density and execution speed are considerably greater than for 8/16-bit platforms.
    
Nordic nRF52 Dev Kit:
    
      
binary available from Nordic Semiconductor, leaving application code to be compiled stand-alone. The embedded stack interface uses an asynchronous and event-driven model removing the need for RTOS frameworks.The nRF52832 offers developers a clean separation between application code development and embedded protocol stacks. This means compile, link and run-time dependencies with the embedded stack and associated de-bugging challenges are removed. The Bluetooth Smart and ANT stack is a pre-compiled.
  
APPLICATIONS
  • IoT
  • Personal Area Networks
  • Interactive entertainment devices
  • Beacons
  • A4WP wireless chargers and devices
  • Remote control toys
  • Computer peripherals and I/O devices
 

Features

Multi-protocol 2.4GHz radio
32-bit ARM Cortex M4F processor
512kB flash + 64kB RAM
Software stacks available as downloads
Application development independent from protocol stack
On-air compatible with nRF51, nRF24AP and nRF24L Series
Programmable output power from +4dBm to -20dBm
RSSI
RAM mapped FIFOs using EasyDMA
Dynamic on air payload length up to 256 Bytes
Flexible and configurable 32 pin GPIO
Programmable Peripheral Interface PPI
Simple ON/OFF global power modes
Full set of digital interfaces including: SPI/2-wire/UART/PDM/
I2S, all with EasyDMA
12-bit/200KSPS ADC
128-bit AES ECB/CCM/AAR co-processor
Quadrature demodulator
Low cost external crystal 32MHz 40ppm for Bluetooth,
50ppm for ANT
Low power 32MHz crystal and RC oscillators
Ultra low-power 32kHz crystal and RC oscillators
Wide supply voltage range (1.7 V to 3.6 V)
On-chip DC/DC buck converter
Individual power management for all peripherals
Package options: 48-pin 6x6 QFN/WL-CSP
 

Documents

Previously Viewed Products