TMC2130-EVAL-KIT is a set of one MCU Board "Startrampe", a bridge Board and one TMC2130-EVAL driver board. It allows for a quick and simple start with only minutes to make your motor turning, while still providing full access to all registers and full functionality and diagnostics.
For Diagnosis all Signals between MCU and TMC2130 are accessible with probes on the new "Eselsbrücke" Bridgeboard. To simplify the transfer to your own processor platform the MCU board can be disconnected.
The TMC2130 provides an integrated motor driver solution for 3D-Printing, Cameras, Scanners and other automated equipment applications. The device has an integrated microstepping indexer, the sensorless stall detection technology StallGuard2™, the sensorless load dependent current control CoolStep™ and the completely noiseless current control mode StealthChop™ and is intended to drive a bipolar stepper motor. The output driver block consists of low RDSon N-Channel power MOSFETs configured as full H-bridges to drive the motor windings. The TMC2130 is capable of driving up to 2.5A of current from each output (with proper heatsinking). TMC2130 is designed for a supply voltage of 5...46V. The device has a SPI interface for configuration and diagnostics and a step and direction interface.
Special features: microstep table; MicroPlyer™; CoolStep™; passive breaking; SpreadCycle™; StallGuard2; ™StealthChop™
Additionally required is a Power Supply (max. 46V).
Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized Trinamic distributor.