MachXO3L Starter Kit

MFG Part #:


Part #:
Short Lead Time
Unit Price:$26.92
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The MachXO3L Starter Kit is a basic breakout board to allow simple evaluation and development of MachXO3L based designs. It has the LCMXO3L-6900C-5BG256C device on it. It is significantly smaller in size and lower cost than the MachXO3L DSI (LCXO3L-DSI-EVN) or SMA (LCXO3L-SMA-EVN) breakout boards while offering common basic functionalities – a good way to start the evaluation of MachXO3L. A SPI Flash is available on this Starter Kit board for evaluating external boot or dual-boot functional capabilities. The MachXO3L DSI breakout board is recommended for MIPI DSI and CSI2 I/O evaluation and the MachXO3L SMA breakout board is recommended for high-speed differential I/O evaluation.

This Starter Kit board is a 3 x 3 inch form factor, and features a USB mini-B connector for power and programming, an LED array, and prototype area. It comes with a pre-loaded demonstration, a counter design that highlights use of the embedded MachXO3L oscillator and programmable I/Os configured for LED drive. A USB cable is also included with the kit, and demos area available for download. By using the free Lattice design tools, you can program the MachXO3L device to review your own custom design.

MachXO3L Starter Kit Key Functions:
• Evaluate CMOS I/Os
• LED driving capability
• Programming via JTAG or I2C
• SPI flash for external boot or dual-boot operation

A basic LED demo is preprogrammed into each board, and available for download as a reference. The following software can be used to develop new designs:
• Lattice Diamond® design software
• Diamond Standalone Programmer

Kit Contents:
• MachXO3L Breakout Board
• Pre-loaded Demo
• Mini USB Cable
• QuickStart Guide

Symmetry Electronics (and its e-commerce division: is an authorized Lattice Semiconductor distributor.


Back to top
MachXO3 FPGA LCMXO3L-6900C-5BG256C
USB Mini-B connector (program/power)
Pre-programmed example design (available on
Eight LEDs
4-position DIP switch
40-hole Prototyping area
Four 2 x 20 expansion header landing for general I/O, JTAG and external power
1 x 8 expansion header landing for JTAG
1 x 6 expansion header landing for SPI/ I2C
SPI Flash for external boot or dual boot
3.3 V and 1.2 V supply rails

Previously Viewed Products

MachXO3L Starter Kit
Part #: LCMXO3L-6900C-S-EVN
MachXO3L Starter Kit