5V to 60V, Three-Phase Brushless DC Motor Pre-Driver

MFG Part #:


Part #:
In Stock
RoHS Status:
Unit Price:$1.35
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The MP6532 is a gate driver IC designed for three-phase brushless DC motor driver applications. It is capable of driving three half bridges consisting of six N-channel power MOSFETs up to 60V.

The MP6532 integrates a regulated charge pump to generate gate drive power, and uses a bootstrap capacitor to generate a supply voltage for the high-side MOSFET driver. An internal trickle-charge circuit maintains sufficient high-side gate driver voltage even when an output is operated at 100% duty cycle.

Internal protection features include programmable short-circuit protection, over-current protection, adjustable dead-time control, under-voltage lockout, and thermal shutdown.

The device integrates 120° commutation using three Hall sensor inputs. The PWM, DIR, and nBRAKE inputs are used to control motor speed, direction, and braking.

The MP6532 is available in 28-pin, 9.7mm × 6.4mm TSSOP and 4mm x 4mm QFN packages with an exposed thermal pad.

Symmetry Electronics is an authorized Monolithic Power Systems distributor.


Back to top
Wide 5V to 60V Input Voltage Range
Built-in Hall Sensor Inputs and 120 Commutation Logic
Charge Pump Gate Drive Supply
Bootstrap High-Side Driver with Trickle-Charge Circuit Supports 100% Duty Cycle Operation
Low-Power Sleep Mode
Programmable Short-Circuit Protection
Over-Current Protection
Adjustable Dead-Time Control to Prevent Shoot-Through
Thermal Shutdown and UVLO Protection
Fault Indication Output
Thermally Enhanced Surface-Mount Package


Back to top
Monolithic Power Systems Datasheet

Previously Viewed Products