8Mb SPI NOR Flash 2.7V-3.6V SOP8 (150mm)

Manufacturer:
MFG Part #:

GD25Q80CEIGR

Part #:
GD25Q80CEIGR
Availability:
In Stock
Unit Price:$0.34
Qty:
Minumum Qty: 1

Ask a Question
Call Me
Email This Page
 
 

Product Information

The GD25Q80C (8M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O data is transferred with speed of 240Mbits/s and the Quad I/O & Quad output data is transferred with speed of 480Mbits/s.

With read speed up to 120MHz and Standard/Dual/Quad I/O operations, GigaDevice SPI NOR Flash supports higher data transfer speed of 240Mbit/s for Dual SPI and 480Mbit/s for Quad SPI.
 
GigaDevice products have the merits of low power consumption with as low as 1uA standby current, high reliability with 20 years data retention and 100,000 Program/Erase cycles, and with wide operating temperature range from ­40°C~+85°C.
 
GigaDevice advanced security features are designed to meet the demand from a variety of consumers including DVD/CD drives, STB, DPF, Desktop and Notebook PCs, DVD Recorders, WLAN, DSL, LCD Monitors, Flat Panel TV, Printers, GPS, MP3 and more.

Symmetry Electronics is an authorized GigaDevice distributor.
 

Features

8M-bit Serial Flash
1024K-byte
256 bytes per programmable page
Program/Erase Speed
Page Program time: 0.6ms typical
Sector Erase time: 45ms typical
Block Erase time: 0.15/0.25s typical
Chip Erase time: 4s typical
Standard, Dual, Quad SPI
Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#
Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#
Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
Flexible Architecture
Sector of 4K-byte
Block of 32/64k-byte
High Speed Clock Frequency
120MHz for fast read with 30PF load
Dual I/O Data transfer up to 240Mbits/s
Quad I/O Data transfer up to 480Mbits/s
Low Power Consumption
20mA maximum active current
1uA maximum power down current
Software/Hardware Write Protection
Write protect all/portion of memory via software
Enable/Disable protection with WP# Pin
Top or Bottom, Sector or Block selection
Advanced Security Features
128-Bit Unique ID for each device
4*256-Byte Security Registers With OTP Locks
Discoverable parameters(SFDP) register
Cycling endurance
Minimum 100,000 Program/Erase Cycles
Single Power Supply Voltage
Full voltage range:2.7~3.6V
Data retention
20-year data retention typical
 

Documents

Previously Viewed Products