Hall-effect Magnetic Sensor / Switch Omnipolar

MFG Part #:


Part #:
Lead Time 36 weeks
RoHS Status:
Unit Price:$0.32
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The Si7201/2/3/4/5/6 family of Hall effect magnetic sensors and latches from Silicon Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13- bit analog-to-digital converter, and flexible comparator circuit. Leveraging Silicon Labs' proven CMOS design techniques, the Si720x family incorporates digital signal processing to provide precise compensation for temperature and offset drift.
Compared with existing Hall effect sensors, the Si720x family offers industry-leading sensitivity, which enables use with larger air gaps and smaller magnets. For batterypowered applications, the Si720x family offers very low power consumption to improve operating life. For automotive applications, the Si720x family is AEC-Q100 qualified. 
The Si720x devices are offered in 3-pin SOT23 and TO-92 packages, with power, ground, and a single output pin that goes high or low as the magnetic field increases. With the three-pin package, tamper indication is by the pin going back to its zero field level at high magnetic field. 
In the 5-pin SOT23 and 8-pin DFN packages, pins are available for both sleep mode activation and separate tamper indication.


Back to top
High-Sensitivity Hall Effect Sensor
Maximum BOP operating point/minimum field strength of <1.1 mT
Omnipolar or unipolar operation
Integrated digital signal processing for temperature and offset drift compensation
Low 400 nA Typical Current Consumption
Selectable / Programmable Sensitivity,
Hysteresis, Output Polarity and Sample Rate
Sensitivity Drift < 3% over Temperature
Wide Power Supply Voltage
1.7 to 5.5 V
3.3 to 26.5 V
AEC-Q100 Qualified for Automotive


Back to top
Si7201 Datasheet

Previously Viewed Products