Field Output Hall Effect Magnetic Position Sensors

MFG Part #:


Part #:
Lead Time 36 weeks
RoHS Status:
Unit Price:$0.50
Minumum Qty: 300
Need a lower quantity?
Ask a Question
Call Me
Email This Page

Product Information

Back to top

The Si7211 family of Hall-effect sensors from Silicon Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13-bit analog to digital converter. After A/D conversion the magnetic field data is available in analog. PWM or SENT format (depending on the part number). 

Leveraging Silicon Labs' proven CMOS design techniques, the Si7211 family incorporates digital signal processing to provide precise compensation for temperature and offset drift. Compared with existing Hall-effect sensors, the Si7211 family offers industry-leading sensitivity and low noise, which enables use with larger air gaps and smaller magnets. 

For automotive applications, the Si7201 family is AEC-Q100 qualified. In the simplest case, the Si7211 devices are offered in a 3 pin package with power, ground, and a single output pin that is signal corresponding to the magnetic field in analog, PWM, or SENT format. 

The Si7211 devices are also offered in a 5 pin SOT23 and 8 pin DFN packages where the additional pins can be used for sleep mode (DIS) or to activate an on-chip coil for built in self-test (BISTb).



Back to top
High-sensitivity Hall-Effect Sensor
Low noise output corresponding to magnetic field
Integrated digital signal processing for temperature and offset drift compensation
Low 50 nA Typical Sleep Current Consumption
Configurable Sensitivity, Output Polarity and Sample Rate
Sensitivity Drift < 3% Over Temperature
Wide power supply voltage
1.7 to 5.5 V
3.3 to 26.5 V
AEC-Q100 Qualified for Automotive
Configurable output options
Industry-Standard Packaging
Surface-mount SOT-23 (3 or 5 pin)
TO92 package
DFN package (coming soon)


Back to top

Previously Viewed Products