2A, 1- or 2- Cell Li-Ion Battery Charger In 3mm×3mm Package

MFG Part #:


Part #:
Short Lead Time
RoHS Status:
Unit Price:$75.00
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The EV2615-Q-00A is an evaluation board for MP2615, a switching charger for 1- or 2- cell lithium-Ion or lithium-Polymer battery packed with built-in power MOSFETs. It’s able to achieve up to 2A charge current which can be programmed via an accurate sense resistor over the whole input range.

MP2615 regulates the charge current and full battery voltage using two control loops to realize high accuracy constant current (CC) charge and constant voltage (CV) charge.

Thanks to the constant-off-time (COT) mode control, 99% duty cycle can be achieved when battery voltage is close to the input voltage to keep the charge current always at a relative high level.

Battery temperature and charging status are always monitored for each condition. Two status monitor output pins are provided to indicate the battery charging status and input power status. The MP2615 also features internal reverse blocking protection.



Back to top

Previously Viewed Products