8-bit Microcontroller

MFG Part #:


Part #:
Short Lead Time
RoHS Status:
Unit Price:$48.90
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The C8051F560 is a highly integrated automotive and industrial MCU that is auto-grade qualified and tested to AEC-Q100 specification with enhanced temperature operation of up to 125 ºC. The C8051F560  features a powerful 8051 core with 50 MHz performance along with 32 kB Flash, 2.25 kB RAM. This MCU also offers integrated communication interfaces and a 12-bit, 25-ch., 200 ksps ADC and 2 comparators in a 7x7 mm, QFP32. With enhanced communication peripherals and robust peripheral set, the C8051F560 is ideal for motor control, sensor interface, parking assistance, seat position and adjustment, fluid level monitoring and other automotive/industrial applications.

Symmetry Electronics is an authorized Silicon Labs distributor.


Back to top
Analog Peripherals
- 12-Bit ADC
Up to 200 ksps
Up to 32 external single-ended inputs
VREF from on-chip VREF, external pin or VDD
Internal or external start of conversion source
Built-in temperature sensor
- Two Comparators
Programmable hysteresis and response time
Configurable as interrupt or reset source
Low current
On-Chip Debug
- On-chip debug circuitry facilitates full speed, nonintrusive in-system debug (no emulator required)
- Provides breakpoints, single stepping, inspect/modify memory and registers
- Superior performance to emulation systems using ICE-chips, target pods, and sockets
- Low cost, complete development kit
Supply Voltage 1.8 to 5.25 V
- Typical operating current: 19 mA at 50 MHz
- Typical stop mode current: 1 A
High-Speed 8051 C Core
- Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks
- Up to 50 MIPS throughput with 50 MHz clock
- Expanded interrupt handler
- 2304 bytes internal data RAM (256 + 2048 XRAM)
- 32 or 16 kB Flash; In-system programmable in 512-byte Sectors
Digital Peripherals
- 33, 25, or 18 Port I/O; All 5 V tolerant
- CAN 2.0 Controllerno crystal required
- LIN 2.1 Controller (Master and Slave capable); no crystal required
- Hardware enhanced UART, SMBus, and enhanced SPI serial ports
- Four general purpose 16-bit counter/timers
- 16-bit programmable counter array (PCA) with six capture/compare modules and enhanced PWM functionality
Clock Sources
- Internal 24 MHz with 0.5% accuracy for CAN and master LIN operation
- External oscillator: Crystal, RC, C, or clock (1 or 2 pin modes)
- Can switch between clock sources on-the-fly; useful in power saving modes Packages
- 40-pin QFN (C8051F568-9 and F570-5)
- 32-pin QFP/QFN (C8051F560-7)
- 24-pin QFN (C8051F550-7)
Automotive Qualified
- Temperature Range: 40 to +125 C
- Compliant to AEC-Q100

Previously Viewed Products

8-bit Microcontroller
Part #: C8051F560-TB-K
8-bit Microcontroller