Wireless Jitter Attenuating Clock Multiplier Development Kit

MFG Part #:


Part #:
Lead Time 52 weeks
RoHS Status:
Unit Price:$281.47
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The Si5386E-E-EB is used for evaluating the Ultra Low Jitter, Any Frequency, 12-output JESD204B Clock Generator. The Si5386 employs fourth-generation DSPLL technology to enable clock generation for LTE/ JESD204B applications which require the highest level of jitter performance. The Si5386E-E-EB has four independent input clocks and a total of 12 outputs. The Si5386E-E-EB can be easily controlled and configured using Silicon Labs’ Clock Builder Pro™ (CBPro™) software tool.

The device revision is distinguished by a white 1 inch x 0.187 inch label with the text “Si5386E-E-EB” installed in the lower left hand corner of the board. (For ordering purposes only, the terms “EB” and “EVB” refer to the board and the kit respectively. For the purpose of this document, the terms are synonymous in context.)

• Cloud Radio Access Network RRHs
• Small cells
• Fixed wireless
• Wireless base stations
• Active antenna systems
• Distributed antenna systems

Symmetry Electronics is an authorized Silicon Labs distributor.


Back to top
Powered from USB port or external power supply
Internal 48.0231 MHz crystal provides holdover mode of operation on the Si5386
CBPro GUI programmable VDDO supplies allow each of the ten primary outputs to have its own supply voltage selectable from 3.3, 2.5, or 1.8 V
CBPro GUI-controlled voltage, current, and power measurements of VDD, VDDA, and all VDDO supplies
Status LEDs for power supplies and control/status signals of Si5386
SMA connectors for input clocks, output clocks and optional external timing reference clock

Previously Viewed Products