I²C-Controlled, Single-Cell USB/Adaptor Charger

MFG Part #:


Part #:
Short Lead Time
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The MP2624A is a 4.5A, highly integrated, switching-mode, battery charger IC for single-cell Li-ion or Li-polymer batteries. The MP2624A supports NVDC architecture with power path management and is suitable for various portable applications. Its low impedance power path optimizes efficiency, reduces battery charging time, and extends battery life. The I2C serial interface with charging and system settings allows the device to be controlled flexibly.

The MP2624A supports a wide range of input sources, including standard USB host ports and high-power wall adapters. The MP2624A detects the input source type according to the USB Battery Charging Spec 1.2 (BC1.2) and then informs the host to set the proper input current limit. In addition, the MP2624A supports USB On-The-Go operation by supplying 5.0V with current up to 2.0A.

The power-path management regulates the system voltage slightly above the set maximum voltage between the battery voltage and the I2C programmable lowest voltage level. With this feature, the system is able to operate even when the battery is depleted completely or removed. When the input source current or voltage limit is reached, power path management reduces the charge current automatically to meet the priority of the system power requirement. If the system current continues increasing, even when the charge current is reduced to zero, the supplement mode allows the battery to power the system together with the input power supply simultaneously.

The MP2624A is available in a QFN-22 (3mmx4mm) package.

• Tablet PCs
• Smart Phones
• Mobile Internet Devices

Symmetry Electronics is an authorized Monolithic Power Systems distributor.


Back to top
High-Efficiency 4.5A 1.7MHz Buck Charger and 1.7MHz 2.0A Boost Mode to Support OTG
o 94% Efficiency at 2A, 92% at 4A
o Fast Charge Time By Battery Path Impedance Compensation
o 94% Efficiency at 5V, 1.2A OTG
o Selectable OTG Current Outputs
3.9V to 7.0V Operating Input Voltage Range
Highest Battery Discharge Efficiency with 10m? Battery Discharge MOSFET up to 9A
Narrow System Bus Voltage Power Path Management
o Instant On Works with No Battery or Deeply Discharged Battery
o Ideal Diode Operation in Battery Supplement Mode
Constant-Off-Time Control to Reduce Charging Time under Lower Input Voltages
High Accuracy of Charging Parameter
IC Port for Flexible System Parameter Setting and Status Reporting
Full DISC Control to Support Shipping Mode and System Restart
High Integration
o Fully Integrated Power Switches
o Built-In Robust Charging Protection
o Built-In Battery Disconnection Function
High Accuracy
o 0.5% Charge Voltage Regulation
o 5% Charge Current Regulation
o 5% Input Current Regulation
o 2% Output Regulation in Boost Mode
o Battery Temperature Sensing for Charge Mode
o Battery Charging Safety Timer
o Thermal Regulation and Thermal Shutdown
o Input/System Over-Voltage Protection
o MOSFET Over-Current Protection
Charging Operation Indicator
Thermal Limiting Regulation on Chip
Tiny QFN-22 (3mmx4mm) Package

Previously Viewed Products