TMC5130 breakout board

MFG Part #:


Part #:
In Stock
RoHS Status:
Unit Price:$25.00
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The TMC5130 breakout board is a development board with the dedicated TMC5130A-TA chip. It is designed to give users the chance to rapidly prototype their applications - making it possible to immediately check how the motor performs with TMC chips while developing the application's software.

The TMC5130A-TA cDriver™ is an integrated motor driver and motion controller solution for 3D-Printing, CCTV cameras, pumps and other automated equipment applications. The device has an integrated sixPoint™ ramp controller, a microstepping indexer, the sensorless stall detection technology stallGuard2™ and the completely noiseless current control mode stealthChop™ and is intended to drive a bipolar stepper motor. The output driver block consists of low RDSon N-Channel power MOSFETs configured as full H-bridges to drive the motor windings. The TMC5130 is capable of driving up to 2.5A of current from each output (with proper heatsinking). TMC5130 is designed for a supply voltage of 5...46V. The device provides a SPI interface for configuration and diagnostics and a step and direction interface.

Symmetry Electronics is an authorized Trinamic distributor.


Back to top
TMC5130A-TA stepper driver and controller
Supply voltage 5-46V, Iphase;RMS up to 1.4A
Solder option to select between internal or external ramp generation (R1/R2)
Con1guration and control via SPI
Use off-board electrolyte cap with your supply
Board width 1.0", board height 1.1"
2x11 pin 0.1" header rows for pins/connectors

Previously Viewed Products

TMC5130 breakout board
Part #: TMC5130A-BOB
TMC5130 breakout board