TMC2660-PA stepper power drive

MFG Part #:


Part #:
Short Lead Time
RoHS Status:
Unit Price:$21.40
Minumum Qty: 1
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The TMC2660 breakout board is a development board with the dedicated TMC2660-PA chip. It is designed to give users the chance to rapidly prototype their applications - making it possible to immediately check how the motor performs with TMC chips while developing the application's software.

The TMC2660-PA provides an integrated motor driver solution for Laboratory Automation, 3D-Printing, Scanners and other automated equipment applications. The device has an integrated microstepping indexer, the sensorless stall detection technology stallGuard2™ and the sensorless load dependent current control coolStep™ and is intended to drive a bipolar stepper motor. The output driver block consists of low RDSon TrenchFET power MOSFETs configured as full H-bridges to drive the motor windings. The TMC2660 is capable of driving up to 4A of current from each output (with proper heatsinking). TMC2660 is designed for a supply voltage of 9...30V. The device has a SPI interface for configuration and diagnostics and a step and direction interface.

Symmetry Electronics is an authorized Trinamic distributor.


Back to top
TMC2660-PA stepper power driver
Supply voltage 9-28V, Iphase;RMS up to 2.0A
Con1g via SPI, control via step/direction
Optional electrolyte cap at supply rail
Optional cooling from bottom side
Board width 1.5", board height 1.0"
2x10 pin 0.1" header rows for pins/connectors

Previously Viewed Products

TMC2660-PA stepper power drive
Part #: TMC2660-BOB
TMC2660-PA stepper power drive