BreakOutBoard With TMC5041

Manufacturer:
MFG Part #:

TMC5041-BOB

Part #:
TMC5041-BOB
Availability:
Short Lead Time
RoHS Status:
Unit Price:$21.40
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The TMC5041 breakout board is a development board with the dedicated TMC5041-LA chip. It is designed to give users the chance to rapidly prototype their applications - making it possible to immediately check how the motor performs with TMC chips while developing the application's software.

The TMC5041-LA cDriver™ is an integrated motor driver and motion controller solution for CCTV cameras, pumps and other automated equipment applications. The device has two integrated sixPoint™ ramp controllers, microstepping indexers, the sensorless stall detection technology stallGuard2™ and the completely noiseless current control mode stealthChop™ and is intended to drive two bipolar stepper motor. The output driver blocks consists of low RDSon N-Channel power MOSFETs configured as full H-bridges to drive the motor windings. The TMC5041 is capable of driving up to 1.5A of current from each output (with proper heatsinking). TMC5041 is designed for a supply voltage of 5...28V. The device provides a SPI interface for configuration and diagnostics and a step and direction interface.

Symmetry Electronics is an authorized Trinamic distributor.
 

Features

Back to top
TMC5041-LA dual stepper driver and controller
Supply voltage 5-26V, Iphase;RMS up to 2x1.1A
Con1guration and control via SPI
Use off-board electrolyte cap with your supply
1x incremental encoder input per motor axis
Board width 1.0", board height 1.4"
2x14 pin 0.1" header rows for pins/connectors
 

Previously Viewed Products

BreakOutBoard With TMC5041
Part #: TMC5041-BOB
BreakOutBoard With TMC5041