DVB-T COFDM Demodulator + USB 2.0

Manufacturer:
MFG Part #:

RTL2832U-GR

Part #:
RTL2832U
Availability:
In Stock
RoHS Status:
Unit Price:$3.00
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The RTL2832U is a high-performance DVB-T COFDM demodulator that supports a USB 2.0 interface. The RTL2832U complies with NorDig Unified 1.0.3, D-Book 5.0, and EN300 744 (ETSI Specification). It supports 2K or 8K mode with 6, 7, and 8MHz bandwidth. Modulation parameters, e.g., code rate, and guard interval, are automatically detected.

The RTL2832U supports tuners at IF (Intermediate Frequency, 36.125MHz), low-IF (4.57MHz), or Zero-IF output using a 28.8MHz crystal, and includes FM/DAB/DAB+ Radio Support. Embedded with an advanced ADC (Analog-to-Digital Converter), the RTL2832U features high stability in portable reception.

The state-of-the-art RTL2832U features Realtek proprietary algorithms (patent-pending), including superior channel estimation, co-channel interface rejection, long echo channel reception, and impulse noise cancellation, and provides an ideal solution for a wide range of applications for PC-TV, such as USB dongle and MiniCard/USB, and embedded system via USB interface.

Applications:
• Portable DTV device
• USB dongle
• MiniCard

Symmetry Electronics is an authorized Realtek distributor.
 

Features

Back to top
COFDM complying with Nordig Unified 1.0.3, D-book 5.0, and ETSI 300-744
Supports multiple IF frequencies (4.57MHz or 36.167MHz) and spectrum inversion
Includes Radio Support (FM/DAB/DAB+)
Includes ISDB-T(SBTVD-T) 1-Seg
Supports Zero-IF input
Single low-cost crystal for clock generation (100ppm)
Automatic transmission mode and guard interval detection
Impulse noise cancellation circuits
Automatic carrier recovery over a wide range offset (800KHz)
Superior performance with pre/post/long echo profiles
Embedded adjacent and co-channel interference rejection circuit
Delayed AGC with programmable Take-Over Point (TOP)
7-bit ADC for RF signals level measurement
Hardware MPEG-2 PID filters
Infra-red port for remote control and wake-up, protocols supported are:
- Microsoft RC6 protocol
- NEC, Sony, SIRC, RC-5 protocol
Eight general purpose I/O ports
USB 2.0 Interface
- Supports USB Full/High speed
- Configurable vendor information via external EEPROM
- Passes USB-IF certification
Signal 3.3V external power is required
48-pin QFN (6x6 mm2) Green Package

Previously Viewed Products

DVB-T COFDM Demodulator + USB 2.0