Embedded Device Server; 1 DB25 (RS-232/RS-485) DCE serial port, RJ45 (10Base-T/100Base-TX) network port, diagnostic LEDs

Manufacturer:
MFG Part #:

UDS100-B

Part #:
UDS100-B
Availability:
Short Lead Time
End Of Life:
11/1/2006
 
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The UDS-10B and UDS100-B are board versions of our popular UDS-10 and UDS100 external device servers. The UDS-10B and UDS100-B can network-enable virtually any electronic device at the board level, allowing it to be remotely monitored, managed, and controlled over the Internet or shared network. These boards are designed to be integrated with the circuit board of devices like factory machinery, security systems, heating and ventilation systems, lighting control systems and point-of-sale devices. The UDS-10B and UDS100-B device servers enable you to connect serial devices to IP-based Ethernet networks, quickly and easily. Using a method called serial tunneling, the UDS-10B and UDS100-B encapsulate serial data into packets and transport it over Ethernet. Using two UDS-10B and UDS100-Bs connected by a network, virtual serial connections can be extended across a facility or around the world. Using Lantronix COM Port Redirector software simplifies your integration process by extending the functionality of your COM port-based Windows® applications. With virtual COM ports, mapped to remote device servers on the network, you can replace direct serial connections. In modem emulation mode, the UDS-10B and UDS100-B are used to replace dial-up modems. The units accept modem AT commands on the serial port, then establish a network connection to the end device, leveraging network infrastructure and bandwidth to eliminate dedicated modems and phone lines. For OEMs and system integrators, they offer easy-to-implement solutions across almost any network, providing distributed intelligence to thousands of devices. They eliminate the need to invest engineering resources to develop similar networking solutions and reduce the time it takes to bring intelligent devices to market. Additionally, UDS board products are a cost-effective alternative replacing dedicated PCs lengthy serial cables with fast and reliable networking technology, and bring several new features and enhancements to the embedded product line. Lantronix Device Installer configuration software simplifies installation and setup. The UDS-10B and UDS100-B can also be set up locally through their serial ports, or remotely over a network using Telnet or a web browser. Flash memory provides for maintenance-free non-volatile storage of web pages, and allows future system software upgrades. If you’re looking for a transparent, cost-effective and scalable means to network-enable your serial devices, look no further than Lantronix.
 

Features

Back to top
1 DB25 (RS-232/RS-485) DCE serial port, RJ45 (10Base-T/100Base-TX) network port, diagnostic LEDs
Flexible and robust IP protocol stack
Supporting RS-232, RS422 or RS-485 serial connections via its DB-25 port
10Mbps or 10/100 Mbps Ethernet through an RJ45 connector
Configurable via Internal Web server, Telnet on Serial
Flash ROM for easy software upgrades
Broad 9-30 VDC Power input through Barrel or Serial Connector
 

Documents

Back to top
Product Brief
Product Selection Guide