TMC211 Stepper Motor Evaluation Board

Manufacturer:
MFG Part #:

TMC211-EVAL BOARD

Part #:
TMC211-EVALBRD
Availability:
Short Lead Time
RoHS Status:
Unit Price:$140.40
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The TMC211 evaluation board makes it possible to evaluate the features of the TMC211 stepper motor controller and driver chip. The TMC211 evaluation board allows connecting the TMC211 chip to a power supply, a motor and a LIN master. The board is mainly intended for direct attachment to the Trinamic USB-2-X interface converter which allows easy interfacing of the evaluation board to a PC running under Windows 98/2000/XP via the USB interface. The evaluation board has particularly small dimensions. At just 74 mm x 60 mm, it can easily be connected with different types of stepping motors. The integrated screw terminals make installation easy; the PCB can be adapted to every type of motor. There is also an evaluation software running under Windows which allows easy evaluation of all the features provided by the TMC211 chip. The evaluation software needs the Trinamic USB-2-X interface converter to work. The TMC211 Evaluation Kit comes with a TMC211 Eval Board, USB-2-X adapter, programming and evaluation software for Windows OS (9x, XP, NT4.0, 2000), documentation, an USB cable and a stepper motor.
 

Features

Back to top
Controls one stepper motor with four bit microstepping
Programmable coil current up to 800 mA
Supply voltage range operating range 8V ... 29V
Fixed frequency PWM current control with automatic selection of fast and slow decay mode
Full step frequencies up to 1 kHz
High temperature, open circuit, short, over-current and under-voltage diagnostics
Internal 16-bit wide position counter
Configurable speed and acceleration settings
Build-in ramp generator for autonomous positioning control
On-the-fly alteration of target position
Reference switch input available for read out
Physical and Data-Link Layers conform to LIN rev. 1.2
Field-programmable node addresses (128)
Dynamically allocated identifiers
Diagnostics and status information as well as motion parameters accessible
LIN bus short-circuit protection to supply and ground and Lost LIN safe operation
Lost LIN safe operation
 

Documents

Back to top
Datasheet
Eval Kit Guide
Product Brief

Previously Viewed Products

TMC211 Stepper Motor Evaluation Board
Part #: TMC211-EVAL BOARD
TMC211 Stepper Motor Evaluation Board