Integrated Dual Axis Digital-Output Gyroscope

Manufacturer:
MFG Part #:

IXZ-2510

Part #:
IXZ-2510
Availability:
Short Lead Time
RoHS Status:
Unit Price:$4.36
Qty:
Minumum Qty: 1
Ask a Question
Call Me
Email This Page
 
 

Product Information

Back to top
The IXZ-2510 is a single-chip, digital-output, 2-axis MEMS gyro IC with programmable full-scale ranges of ±250, ±500, ±1000, and ±2000 degrees/sec (dps), which is useful for precision tracking of both fast and slow motions. Factory-calibrated initial sensitivity reduces production-line calibration requirements. The part’s on-chip FIFO simplifies system timing and lower system power consumption. The FIFO allows a system microcontroller to burst read the sensor data and then go to sleep while the IXZ-2510 collects more data.

Other industry-leading features include on-chip 16-bit ADCs, programmable digital filters, a precision clock with 1% variation from -40°C to 85°C, an embedded temperature sensor, and programmable interrupts. Parts are available with a Fast-Mode I²C serial interface, a VDD operating range of 1.71 to 3.6V, and a VDDIO voltage from 1.71V to 3.6V.

By leveraging its patented and volume-proven InvenSense Fabrication platform, which integrates MEMS wafers with companion CMOS electronics through wafer-level bonding, InvenSense has driven the IXZ-2510 package size down to a footprint of 3x3x0.9mm (QFN), while providing the highest performance, lowest noise, and the lowest cost semiconductor packaging to address a wide range of handheld consumer electronic devices. The device provides the highest robustness by supporting 10,000g shock in operation. The highest cross-axis isolation is achieved by design from its single silicon integration.

Symmetry Electronics is an authorized InvenSense distributor.
 

Features

Back to top
X- & Z-Axis angular rate sensors (gyros) on one integrated circuit
Angular rate sensors (gyros) with user-programmable full-scale-range of 250/sec, 500/sec, 1000/sec, or 2000/sec.
Low power consumption with both axes active: 2.8mA
16-bit ADCs for digitizing sensor outputs
Programmable low-pass filters
FIFO buffers complete data set, reducing timing requirements on the system processor and saving power by letting the processor burst read the FIFO data, and then go into a low-power sleep mode while the device collects more data.
VDD supply voltage range of 1.71V to 3.6V
IC and SPI interface
Small 3x3x0.9mm QFN package
RoHS and Green compliant
 

Documents

Back to top
InvenSense Datasheet

Previously Viewed Products