Ultra-Low-Power Convergence SoC

MFG Part #:


Part #:
Contact Symmetry For Lead Time
RoHS Status:
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.
Ask a Question
Call Me
Email This Page

Product Information

Back to top
The RS9113 module family is based on Redpine Signals’ RS9113 ultra-low-power Convergence SoC. These modules offer dual-band 1x1 802.11n, dual-mode Bluetooth 4.0 and ZigBee® 802.15.4 in a single device. They are high performance, long range and ultra-low power modules and include a proprietary multi-threaded MAC processor called ThreadArch®, digital and analog peripheral interfaces, baseband digital signal processor, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI flash.

The modules are offered with two software architectures – hosted and embedded. The hosted variant (n-Link®) realizes a host-based architecture where the necessary MAC and PHY layers are implemented in the device to support high-performance, long range WLAN, Bluetooth and ZigBee applications in a 32-bit host processor over SDIO or USB interfaces. The embedded variants (WiSeConnect® and Connect-io-n®) realize WLAN, Bluetooth and ZigBee protocols along with Wi-Fi Direct™, WPA/WPA2-PSK, WPA/WPA2-Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, EAP-PEAP) and a feature-rich networking stack thus providing a fully-integrated solution for embedded low-end wireless applications. These modules can be connected to 8/16/32-bit host processors through SPI, UART, USB and USB-CDC interfaces.

The modules are available in two hardware footprints. One footprint type comes with an integrated antenna and a U.FL connector and the other footprint comes without an integrated antenna.

• Smartphones, Tablets and e-Readers
• VoWi-Fi phones
• Smart meters and in-home displays
• Industrial automation and telemetry
• MP3 music and MP4 video players
• Medical devices
• Industrial monitoring and control
• Home and building automation
• Wireless Headset

Symmetry Electronics is an authorized Redpine Signals distributor.


Back to top
Compliant to single-spatial stream IEEE 802.11 a/b/g/n with dual band (2.4 and 5 GHz) support.
Support for 20MHz and 40MHz (n-Link only) channel bandwidths.
Transmit power up to +18dBm with integrated PA.
Receive sensitivity of -97dBm.
Compliant to dual-mode Bluetooth 4.0
Transmit power up to 15dBm (class-1) with integrated PA.
Receive sensitivity of -94 dBm.
Compliant to IEEE 802.15.4
Transmit power up to 15 dBm with integrated PA.
Receive sensitivity of -102 dBm.
ZigBee Pro stack embedded.
Seamless integration with 32-bit processors over SDIO and USB.
Host Drivers for Linux, Android and Windows2
WiSeConnect and Connect-io-n:
WLAN, Bluetooth and ZigBee stacks embedded in the device.
Supports Wi-Fi Direct, Access point mode, WPA/WPA2-PSK, WPA/WPA2-Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, EAP-PEAP)
Bluetooth profiles embedded.
ZigBee Pro stack embedded.
TCP/IP stack (IPv4/IPv6), HTTP/HTTPS, DHCP, ICMP, SSL 3.0/TLS1.2, Websockets, IGMP, FTP Client, SNTP, DNS, mDNS, DNS-SD, SNMP4 embedded in the device.
SPI, UART, USB, USB-CDC host interfaces.
FCC, IC, ETSI/CE Certified.
U.FL connector for external antenna connection.
Dual external antenna for antenna diversity (n-Link only).
Wireless firmware upgrade (for WiSeConnect and Connect-io-n only).
Options for single supply of 3.0 to 3.6 V operation or multiple supplies for power saving.
Operating temperature range: -40C to +85C

Previously Viewed Products

Ultra-Low-Power Convergence SoC
Part #: RS9113-N0Z-D0N-12
Ultra-Low-Power Convergence SoC