Multi-protocol WiSeMCU™ device

MFG Part #:


Part #:
Contact Symmetry For Lead Time
RoHS Status:
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.
Ask a Question
Call Me
Email This Page

Product Information

Back to top
Redpine Signals' RS10003 WiSeMCU™ device is the industry's first Wireless MCU with a multi-protocol wireless (Wi-Fi+Bluetooth+Zigbee) sub-system. It is a fully integrated module with an ultra-low-power ARM Cortex M4F microcontroller as an application processor, a built-in wireless subsystem, advanced security, power-management, frequency reference, RF power-amplifiers, diversity RF Front-end and passives. The WiSeMCU™ comes with an SDK to enable plug-and-play hardware and software development for the wireless Internet of things.

The ultra-low-power microcontroller subsystem in RS10003 integrates an ARM Cortex M4F processor with 128 KB of on-chip SRAM and 1MB of on-chip flash available for application development.A slew of peripherals including multiple USB Host, USB Slave, CAN, ADC, DAC, Quadrature Position/Revolution counter, Multi-function Serial interface supporting UART, LIN, SPI, I²C, comprehensive Multi-function timer, PWM, RTC etc satisfy the interfacing needs of most IoT devices.

The comprehensive wireless networking subsystem in RS10003 integrates 1x1 802.11n, advanced TCP/IP networking stack, Bluetooth4.0 solution with integrated application profiles and ZigBee for Home Automation and Smart Energy applications.

Symmetry Electronics is an authorized Redpine Signals distributor.


Back to top
Application Subsystem
ARM Cortex-M4F processor, running at a frequency of up to 160 MHz
IntegratedFloating Point Unit (FPU), Memory Protection Unit (MPU), Built-in Nested Vectored Interrupt Controller (NVIC), Non-maskable Interrupt (NMI) input
Debug options: JATG and Embedded Trace Macrocells (ETM)
1MB on-chip flash program memory with flash accelerator and 32KB work flash memory
128 kB SRAM for code and data use
USB2.0 (Function/Host) Full-Speed supported upto Max 6 EndPoint
CAN Interface supports upto max two channels
Upto 70 high speed general purpose I/O ports.
Multi-function Serial Interface upto max eight channels( UART, CSIO(SPI), LIN, 1C)
Base timer(Max Eight channels) supporting PWM, PPG, reload timer, PWC.
Comprehensive Timers: Multi-function timer(MFT) upto max two units RTC,QPRC, Dual Timer, Watchdog Timer max upto two units
Analog peripherals: 12-bit, 24-channel, Analog-to-Digital Converter (ADC)
Security: Unique ID of the device (41 bit) is set
Six low-power consumption modes, SLEEP, Timer, RTC, STOP, Deep Standby RTC, Deep Standby stop.
12-bit Digital to Analog (AD) suporting upto max two channels
DMA Controller max upto 8 channels
CRC (Cyclic Redundancy Check) Accelerator
External interrupt input pin: Max upto 16 pins
Low-Voltage Detector (LVD)
Wireless Subsystem
WLAN: Compliant to IEEE 802.11 a/b/g/n with dual band support.
Bluetooth: Compliant to dual-mode Bluetooth V4.0
ZigBee: Compliant to IEEE 802.15.4
Supports both 20MHz and 40MHz bandwidth in WLAN.
WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm.
Support for Bluetooth Transmit power class-1 with integrated PA and high performance
Bluetooth receiver with -94dBm Rx sensitivity.
Support for multiple ZigBee output powers up to +15dBm with integrated PA and high performance ZigBee receiver with -102dBm Rx sensitivity.
Dual external antenna (diversity supported).
Embedded WLAN stack, ZigBee stack, BT stack and full-featured TCP/IP network stack.
Support for Embedded Wi-Fi Direct, Enterprise Security, Client mode and Access Point mode.
Supports advanced security features: WPA/WPA2-Personal and Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, PEAP-MSCHAP-V2)
BT profile support
Zigbee Pro stack embedded.

Previously Viewed Products

Multi-protocol WiSeMCU™ device
Part #: RS10003-NBZ-D0M-12
Multi-protocol WiSeMCU™ device