Dual Mode Bluetooth 5 with Cortex-M4F Application Processor

MFG Part #:


Part #:
Short Lead Time
RoHS Status:
Unit Price:$13.84
Minumum Qty: 364
Need a lower quantity?
Ask a Question
Call Me
Email This Page

Product Information

Back to top
Redpine Signals' RS13100 WiSeMCU™ family of SoCs and modules provides ultra-low power dual mode Bluetooth 5 and up to 180 MHz ARM® Cortex-M4F application processor with advanced security and a rich set of digital/analog peripherals. The RS13100 provides the necessary wireless connectivity options and processing power for audio, data transfer, locationing and control/monitoring applications for wearable, home automation, industrial automation, lighting and home appliance markets.

Solution Highlights
• Highly integrated and secure solution with dual-mode Bluetooth 5
• Efficient on-chip application processor based on ARM Cortex-M4F with up to 180 MHz performance, up to 4 MB dedicated flash and up to 272 kB of RAM
• Support for BLE 5 long range (125 kbps), high data rate (2 Mbps) and advertising extensions
• Ultra-low power consumption with multiple power modes to reduce the system energy consumption
• Multiple levels of security including PUF (Physically Unclonable Function), Crypto HW accelerators, Secure Bootloader and Secure Zone, to create a highly secure system
• Ultra-small size SoC (3.51 mm x 3.6 mm) and module (4.63 mm x 7.90 mm) options (additional package options are also available)
• Integrated wireless stacks and profiles for easy evaluation and integration
• Leading edge RF performance (up to 20 dBm output power for BLE) providing long range up and higher throughputs
• Unique peripherals like ULP sub-system, Voice Activity Detection (VAD) and up to 8 capacitive touch sensor inputs

Symmetry Electronics is an authorized Redpine Signals distributor.


Back to top
ARM Cortex-M4 core with up to 180 MHz
Integrated FPU, MPU and NVIC
SWD and JTAG debug options
Internal and external oscillators with PLLs
Flash In-Application Programming (IAP), In-System Programming (ISP) and Over-the-Air Wireless Firmware Upgrade
Power-On Reset (POR), Brown-Out and Black-out Detect (BOD) with separate thresholds
Up to 4 MB integrated Quad-SPI flash with inline AES engine and XIP
Up to 272 KB SRAM2
4-way set-associative 16 KB I-Cache
HW device identity and key storage with PUF
Trusted Execution Environment with Secure Boot loader
Accelerators: AES128/256, SHA256/384/512, RSA, ECC, ECDH, RNG, CRC
Compliant to dual-mode Bluetooth 5
Transmit power up to +20 dBm1 for Bluetooth LE with integrated PA
Transmit power up to +15 dBm1 for Bluetooth EDR with integrated PA
Receiver sensitivity as low as -104 dBm1
Data rates: 125 kbps, 500 kbps, 1 Mbps, 2 Mbps, 3 Mbps
EDR+2.1, 4.0, 4.1, 4.2 and 5.0
BT LE 1 Mbps, 2 Mbps and Long Range modes
Piconet and scatternet
BT profile support2 for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, SDP, L2CAP, RFCOMM, GATT, IAP1, IAP2
RF Features
Integrated baseband processor with calibration memory, RF transceiver, high-power amplifier, balun, T/R switch and flash memory
MCU Sub-system Power Consumption
Active current as low as 19uA/MHz1 in low power mode
Deep sleep mode current: ~500nA1
Dynamic Voltage & Frequency Scaling
Deep sleep mode with only timer active - with and without RAM retention

Previously Viewed Products