Fully Integrated Z-Wave® Wireless Modem with On-Board Antenna

Manufacturer:
MFG Part #:

Z-Wave serial interface module with antenna

Part #:
ZM5304AU-CME3R
Availability:
Short Lead Time
Unit Price:$9.64
Qty:
Minumum Qty: 1

Ask a Question
Call Me
Email This Page
 
 

Product Information

The Silicon Labs ZM5304 Modem is a fully integrated Z-Wave modem module in a small 27mm x 15.2mm x 5.5mm form factor. It is an ideal solution for home control applications such as access control, appliance control, AV control, building automation, energy management, lighting, security, and sensor networks in the “Internet of Things”.

A baseband controller, sub-1 GHz radio transceiver, crystal, decoupling, SAW filter, matching, and the antenna is included to provide a complete Z-Wave solution to an application executing in an external host microcontroller. The ZM5304 Modem is certified with the FCC modular transmitter approval, ready to be used in any product without additional testing and license costs.

The ZM5304 Modem is based on an 8-bit 8051 CPU core, which is optimized to handle the data and link management requirements of a Z-Wave node. The UART0 or USB interface can be used to access the Z-Wave stack available in the on-chip Flash memory, or to easily upgrade the modem firmware.

Radio Transceiver
• Receiver sensitivity with SAW filter down to -103dBm @ 9.6kbps
• Transmit power with SAW filter up to +4dBm
• Z-Wave 9.6/40/100kbps data rates
• Supports all Z-Wave sub-1 GHz frequency bands (865.2MHz to 926.3MHz)
• Supports multi-channel frequency agility and listen before talk
• Regulatory Compliance:
- ACMA: AS/NZS 4268
- CE: EN 300 220/489
- FCC: CFR 47 Part 15
- IC: RSS-GEN/210
- MIC: ARIB STD-T108

Symmetry Electronics is an authorized Silicon Labs distributor.
 

Features

Complete Z-Wave stack available over UART or USB
Firmware upgradeable via UART or USB
32kB of byte addressable NVM memory
Fully Integrated crystal, EEPROM, SAW filter, matching circuit, and antenna
No external components required
FCC modular transmitter approval
ITU G.9959 compliant
Modem
UART speed up to 230.4kbps
USB 2.0 full speed
Z-Wave serial API accessed over UART or USB
ADC for internal battery monitoring
Hardware AES-128 security engine
Power-On-Reset / Brown-out Detector
Supply voltage range from 2.3V to 3.6V for optional battery operation
TX mode current typ. 36mA @ 0dBm
RX mode current typ. 33mA
Normal mode current typ. 15mA
Sleep mode current typ. 2A
Less than 1ms cold start-up time
 

Documents

Previously Viewed Products

Fully Integrated Z-Wave® Wireless Modem with On-Board Antenna
Part #: Z-Wave serial interface module with antenna
Fully Integrated Z-Wave® Wireless Modem with On-Board Antenna