We Make Your Cellular Design Easy
Symmetry has made Cellular M2M design easier with custom Cellular IN-A-BOX quick-start development kits based on Telit CE910, DE910, HE910 and GE864-GPS M2M modules. Included in each kit is everything required to begin a cellular design for a variety of applications. The kits provide a stable hardware platform to begin software development along with a software tool that verifies the setup. The various cellular technologies supported include: 3G, HSPA+, GSM, CDMA, 1xRTT, EVDO; GPS tracking capabilities are available with some of the kits. Using the included step-by-step getting started guide, an engineer can be up and running with any one of our custom kits in less than 3 minutes. Available only on SemiconductorStore.com
Each Kit Includes:
- Telit EVK2
- Telit Interface Board
- Software Development Introduction Tools
- Cellular Antenna(s)
- Power Supply
- Getting Started Guide & Documentation
- For use on Aeris, Sprint or Verizon networks
Plus...
Telit DE910-DUAL Interface Board
The EVDO-IN-A-BOX kit is based on the Telit DE910-DUAL CDMA module. This kit contains everything you need to start your CDMA 1xEV-DO cellular design and is pre-programmed for the Aeris, Sprint or Verizon network.
Telit CE910-DUAL Inteface Board
The RTT-IN-A-BOX kit is based on the Telit CE910-DUAL CDMA module. This kit contains everything you need to start your CDMA 1xRTT cellular design and is pre-programmed for the Aeris, Sprint or Verizon network.
Telit HE910 Interface Board
The 3G-IN-A-BOX kit is based on the Telit HE910 3G HSPA+ module. This kit contains everything you need to start your cellular M2M design. ... learn more
Telit GE864-GPS Interface Board
The GSM + GPS-IN-A-BOX development kit is based on the Telit GE864 - GPS module and includes everything you need to start your cellular plus GPS M2M design. ... learn more
Choosing Your Kit
Choose the correct kit for your cellular technology and data transfer rates by referring to the chart below.
2G | 3G | |
GSM |
![]() |
![]() |
CDMA |
![]() |
![]() |
Product Features Overview
PRODUCT
|
Cellular Product |
![]() 3G IN-A-BOX (HE910 Family) |
![]() CDMA 1xRTT IN-A-BOX (CE910 DUAL) |
![]() CDMA EVDO IN-A-BOX (DE910 DUAL) |
![]() GSM+GPS IN-A-BOX (GE864-GPS) |
TECHNOLOGY
|
Cellular Technology | 3.75G (HSPA+) 3G (UMTS) 2G (GSM/GPRS/EDGE) |
CDMA (1xRTT) | CDMA (1xRTT) CDMA (EVDO) |
2G (GSM/GPRS) |
UFF
|
FAMILY FORM FACTOR | xE910 | xE910 | xE910 | xE864 |
BANDS
|
Bands | UMTS 800/850/AWS/1900/2100 (Global) UMTS 800/850/900/2100 (EU) UMTS 800/850/AWS/1900 (NA) GSM 800/900/1800/1900 |
CDMA 800/1900 (DUAL) DDMA 800(SC) |
CDMA 800/1900(DUAL) CDMA 800 (SC) |
GSM 850/900/1800/1900 |
DATA SPEED (UL/DL)
|
2G (GSM | GPRS) Kbps 2.75G (CDGC) Kbps 3G (UMTS) Kbps 3.5G (HSDPA) Mbps 3.5G (HSPA) Mbps. 3.75G (HSPA+) Mbps CDMA (1xRTT) Kbps 4G (LTE) Mbps |
3.75G 5.76/21.0 3.5G 5.76/7.2 3G 834/384 2G 118.4/236.8 |
CDMA 153.6k bps (full-duplex) | CDMA 153.6k bps (full-duplex) CDMA (EVDO) 1.8/3.1 |
2G 40/80 |
INTERFACES
|
USB type | 2.0-HS | 2.0-FS | 2.0-HS | |
AAI (alalog audio interface) | • | • | |||
DVI (digital voice interface) | • | • | • | • | |
DAC (digital to analog converter) | • | • | • | ||
ADC (analog to digital converter) | • | • | • | • | |
GPIO (general purpose input/output) | • | • | • | • | |
FEATURES
|
Size (mm) | 28.2 x 28.2 x 2.2 | 28.2 x 28.2 x 2.05 | 28.2 x 28.2 x 2.05 | 30 x 30 x 2.8 |
Surface mounting | LGA | LGA | LGA | BGA | |
Antenna connector | RF PAD | RF PAD | RF PAD | RF PAD | |
Temperature Range | -40°C to +85°C | -30°C to +85°C | -30°C to +85°C | -40°C to +85°C | |
GPS channels | 28 | 32 | 48 | ||
Embedded TCP/IP Stack | • | • | • | • | |
SIM Access Profile | • | • | |||
Python® Script Interpreter | • | • | |||
Designed for Automotive Applications | |||||
Read for e-Call | • | • | |||
Run AT Commands Remotely | • | • | |||
Jamming Detection | • | • | |||
Remote Module Management (RMM) | • | • | |||
Embedded Usage Monitor | • | • | |||
SIM on CHIP | • | ||||
m2mLOCATE | • | • | • | • | |
AVAILABLE FOR
|
EMEA | • | • | ||
LATIN AMERICA | • | • | |||
NORTH AMERICA | • | • | • | • | |
APAC | • | • | • | • | |
AUSTRAILIA | • | • | |||
AFRICA | • | • | |||
RUSSIA | • | • | |||
KOREA | • |
Featured Articles
In addition to custom Cellular M2M development kits, SemiconductorStore has put together several articles to help guide engineers through new and existing M2M designs:
![]() |
Choosing RF protocols: Wi-Fi, Bluetooth, Bluetooth Low Energy, ZigBee, DECTThe RF protocols that developers use for industrial, scientific, and medical (ISM) applications must meet exacting requirements for robustness, reliability, and connectivity. Read more → |
![]() |
Top 6 Considerations in OEM Cellular Design - Telit Newsletter Article - September 2012Before starting your cellular design choose the cellular network provider you are going to work with or in simple words think about which SIM cards your customers will use. Read more → |
![]() |
Cellular Adds Complexity to the RF Design ProcessA major difference between a cellular M2M and an RF design, is working with network providers that offer different coverage areas and rate plans. Read more → |