Product InformationBack to top
Silvertel’s Ag9800 series PD modules still offer all the features required to extract power from a conventional twisted pair Category 5 Ethernet cable, in the smallest package size available. The modules fully conform to the 802.3af Power-over-Ethernet (PoE) standard and include 1.5kV isolation, PoE signature and integral DC to DC converter. The modules provide a Class 0 signature.
The modules offer a simple PoE solution using minimal extra low cost components. Ag9800 will accept power from either the spare or data pair of the Ethernet cable. This is connected through external bridge rectifiers, enabling the device to be powered from mid- or end-span PSE. The integrated optimised DC/DC converter operates over a wide input voltage range providing a high efficiency (up to 87%) regulated output. In addition it provides built-in protection against overloads and short-circuits. The DC output nominal voltage is easily adjusted using a simple pull up/down resistor.
The Ag9800 provides signature and control circuitry to give full PoE compatibility. This signature is required by the Power Sourcing Equipment (PSE) before it will provide power to the port.
Silvertel’s Ag9800 is ideally suited as a cost effective solution for POE for any Ethernet applications e.g. IP cameras, VoIP telephones, WAPs and door access. Its minimal footprint makes it perfect for any space or height constrained designs.
Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized Silvertel distributor.
FeaturesBack to top
Smallest package size to date:
Cost optimised IEEE802.3af POE
Overload and short-circuit
Wide input voltage range
Power output-12W at 12V, 9W at 5V
or 6W at 3.3V
1500V isolation (input to output)
Integral DC/DC converter
DocumentsBack to top
Related ProductsBack to top
Previously Viewed Products
You can contact our inside sales team to purchase below the minimum allowed. Please call us Toll Free (USA only) (866) 506-8829 or (310) 536-6190.