Starter Kit - 16 Bit YCbCr Input SiI9022AYBT HDMI Transmitter, No HDCP, with HDMI Type-D connector

MFG Part #:


Part #:
Short Lead Time
RoHS Status:
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.


Product Information

Back to top
Starter Kit for SiI9022

This product requires a signed NDA for the complete datasheet

The SiI9024A is an ultra low-power HDMI® transmitter with integrated HDCP engine and HDCP keys designed for power-sensitive handheld consumer electronics devices such as mobile phones, cameras, portable media players, personal internet devices to enable consumers to share premium content securely in both high-definition format and quality on an HDTV.

•HDMI 1.3
•Simplay HD
•DVI 1.0
•HDCP 1.2

Digital Video
•Integrated TMDS core
•DTV resolution support - upto 1080p
•PC resolution support - VGA/XGA/SXGA/WSXGA/UXGA
•Flexible interface to HD MPEG decoders:
◦ 12/24-bit RGB YCbCr 4:4:4
◦ 16/20/24-bit YCbCr 4:2:2
◦ 8/10/12-bit YCbCr 4:2:2 (ITU-R BT.601 & BT.656)
•Integrated YCbCr —> RGB conversion
•4:2:2 —> 4:4:4 up-converter
•Programmable Data Enable (DE) generator

Consumer Electronic Control (CEC)
•Dedicated CEC signals
•Integrated hardware arbitration logic reduces local CPU overhead

Digital Audio
•DVD-Audio support via 4xI2S inputs (81-ball, 72-pin)
•Supports 2-channel 192kHz or 8-channel 96kHz
•Supports IEC60958 2-ch PCM or IEC61937 compressed audio (Dolby Digital, DTS, etc.)
•Industry-standard S/PDIF input
•Integrated MCLK generator

System Operation
•Simplified API programming through Transmitter Programming Interface (TPI) and CEC Programming Interface (CPI)
•Programmable DDC controller simplifies system design
•Flexible interrupt registers with interrupt pin
•Monitor detection supported through hot plug and receiver sense

Power Management
•Flexible power-down modes
•1.2V, 1.8V and 3.3V cores provide low-power operation

Available Packages
•81-ball BGA (4mm x 4mm, 0.4mm ball pitch)
•49-ball BGA (4mm x 4mm, 0.5mm ball pitch)
•72-pin QFN (10mm x 10mm)

Operating Range
•-20C° to +85C° extended temperature support


Back to top
HDMI 1.3 compliance
Integrated TMDS Core
Upto 1080p/60 DTV resolution support
Dedicated CEC signals
DVD-Audio support via I2S input
Simplified API programming through Transmitter Programming Interface (TPI) and CEC programming interface (CPI)
D3, D2, D0 ACPI power states supported
-20C to 85C extended temperature support


Back to top
Data Brief
NDA Request Form
Product Brief
White Paper