Hall Switch - Unipolar, Low Sensitivity

Manufacturer:
Family:
MFG Part #:

HAL101JQ-I-2-B-1

Part #:
HAL101JQ-I
Availability:
Short Lead Time
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.

 
 

Product Information

Back to top
The HAL 1xy Hall switch family is designed for home appliances and industrial applications. The sensors are produced in CMOS technology and include a temperature-compensated Hall plate with active offset compensation, a comparator, and an open-drain output transistor. The comparator compares the actual magnetic flux through the Hall plate (Hall voltage) with the fixed reference values (switching points). Accordingly, the output transistor is switched on or off. The active offset compensation leads to magnetic parameters which are robust against mechanical stress effects. In addition, the magnetic characteristics are constant in the full supply voltage and temperature range. The HAL 1xy family is available in the SOT89B SMD package and in the leaded TO92UA package.


The Hall-effect sensor is a monolithic integrated circuit that switches in response to magnetic fields. If a magnetic field with flux lines perpendicular to the sensitive area is applied to the sensor, the biased Hall plate forces a Hall voltage proportional to this field. The Hall voltage is compared with the actual threshold level in the comparator.

The temperature-dependent bias is used to compensate the decreasing induction of magnets at higher temperatures. If the magnetic field exceeds the threshold levels, the open-drain output switches to the appropriate state. The built-in hysteresis eliminates oscillation and provides switching behavior of output without bouncing.

Magnetic offset caused by mechanical stress is compensated for by using the “switching offset compensation technique”.
 

Features

Back to top
Overvoltage protection at all pins
Reverse-voltage protection at VDD pin
Magnetic characteristics are robust against mechanical stress effects
Short-circuit protected open-drain output by thermal shut down
Constant switching points over a wide supply voltage and temperature range
The decrease of magnetic flux density caused by rising temperature in the sen- sor system is compensated by a built-in negative temperature coefficient of the magnetic characteristics
High temperature stability for home appliances and industrial applications
High ESD rating
Temperature ranges: C (Commercial, TJ = 0 C to 85 C) I (Industrial, TJ = 20 C to 125 C)
Operates from 3.8 V to 24 V supply voltage
Operates with static magnetic fields and dynamic magnetic fields up to 10 kHz
 

Documents

Back to top
Micronas HALxy Datasheet
Micronas HALxy Product Information
 

Previously Viewed Products

Hall Switch - Unipolar, Low Sensitivity