Universal Digital Sensor Input/Output Driver (3V)

MFG Part #:


Part #:
Contact Symmetry For Lead Time
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.


Product Information

Back to top
The iC-DX is a monolithic switch capable of driving ohmic, inductive and capacitive loads and features integrated reverse polarity protection. The supply voltage VB of the device can range from 8 to 30V.

Output source/sink-current is at least 150 mA, with saturation voltages of 2 V max.

With input OE on high level state, the output works as a push-pull stage under control of pin IN. If pin IN is set either to high or low level, the output acts as a high-side (PNP) or low-side (NPN) driver which is activated by a high logic level on input OE.

Output transitions are slew-rate limited to minimize interference on lines. The output is current limited to 450mA maximum and short circuit protected by shutting down the device with excessive temperature.

A regulated 5 V supply which can be loaded up to 10mA is available at pin VOUT.

Symmetry Electronics (and its e-commerce division: SemiconductorStore.com) is an authorized iC-Haus distributor.


Back to top
Configurable high-side, low-side and push-pull operation
Current limited output (< 450 mA)
Reverse polarity protection
150 mA output current
Wide supply voltage range from 8 to 30 V
Driver shut-down with over temperature
Integrated free-wheeling diode for inductive loads
Sensor supply voltage output of 5 V, 10 mA


Back to top

Previously Viewed Products