802.11 abgn (dual band: 2.4 GHz & 5 GHz) module with embedded WLAN stack, TCP/IP stack; hardware configurable UART and SPI host interfaces; software based TCP/IP stack bypass option for SPI

Part #:


Short Lead Time
This item is currently not available for purchase online.

Please call us at 877-466-9722 to request a quote.


Product Information

Back to top

The RS9110-N-11-28-i(xx) module from Redpine's Connect-io-n™ family of products is a complete dual band (2.4/5GHz) IEEE 802.11abgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, Baseband processor, dual band RF transceiver with power amplifier and diplexer; and all WLAN protocol functionality, networking stack in embedded firmware to make a dual band 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host system or data source. The module is bBased on Redpine's 802.11n chipset - RS9110.



Back to top
Compliant to 802.11b/g and single stream 802.11n
2.4/5 GHz, 802.11n RF transceiver with power amplifier
Highly integrated 2.4 GHz/5 GHz transceiver with direct conversion architecture
Self-contained serial-to-wireless functionality - does not require any host processor bandwidth
WPA/WPA2-PSK, WEP and TKIP modes of security
Host Interface: UART and SPI, selectable through a hardware pin
Integrated TCP/IP stack with option to bypass in SPI mode through software configurationi
Configuration through AT commands and SPI frames
Ultra low power operation with power save modes
Ad-hoc and infrastructure modes for maximum deployment flexibility.
Single supply 3.1 to 3.6 V operation


Back to top
Evaluation Board Product Brief
Product Brief