iC-Haus: Sensor interface iC has two independent channels

Nov 3, 2008
 
iC-GF is a monolithic interface iC with two independent switching channels which enables digital sensors to drive peripheral elements, such as programmable logic controllers (PLC) and relays, for example. All functions are controlled either by pins or via SPI interface, with extended functionality and configurability in SPI mode. The output switches can be configured for push-pull, high-side or low-side operation. The switches are designed to cope with high driver currents of at least 100 mA, are current limited and also short-circuit-proof. The output current limit can be easily set with a resistor. The protective overload feature is accomplished in a way so that capacitive loads can be switched with low repeat rates without the protective circuitry cutting in. In SPI mode, the chip acts as an SPI slave and allows function configuration via register access. It also features a diagnostic register and supports communication requests at the feedback input, which generates an interrupt signal. The connected sensor can be parameterized using the feedback channel. The pins on the 24 V line side of the sensor interface are protected against reverse polarity. This makes any external reverse polarity protection diodes superfluous. iC-GF features an integrated switching converter which generates 5 V and 3.3 V voltages with the aid of two downstream linear regulators. The switching regulator comes equipped with a spread spectrum oscillator to reduce interferences. The power supply range is from 9 to 30 V within a temperature range of 40 to 85 C. The QFN24 package is RoHS compliant and measures only 4 mm x 4 mm. Introducing iC-Haus iC-Haus GmbH is one of the leading independent German manufacturers of standard ICs (ASSP) and customized ASiC semiconductor solutions. The company has been active in the design, production and sales of application-specific iCs for industrial, automotive and medical technology since 1984 and is represented worldwide. The iC-Haus cell libraries in bipolar, CMOS and BCD technologies are fully equipped to realize the design of Sensor-ASiC, Laser-/Opto-ASiC and Actuator-ASiC devices. The iCs are assembled either in standard plastic packages or using chip-on-board technology to manufacture complete microsystems, multichip modules or in combination with sensors optoBGAsTM. iC-Haus GmbH, Am Kuemmerling 18, D55294 Bodenheim, Germany Tel: +49 (0)6135 9292-307 Fax: +49 (0)6135 9292-392 Web: www.ichaus.com Email: sales@ichaus.com

Written By: Kristy Tantillo
Web Marketing Specialist
(866) 506-8829

Contact Us

Subscribe

Sign up to get tech news, product updates and store promos from Symmetry Electronics.

Subscribe

Choose Topic

Press Archive

  2018
  2017
  2016
  2015
  2014
  2013
  2012
  2011
  2010
  2009
  2008
  2007
  2006
  2005
  2004