Designed for quick integration with minimal engineering effort, the chip-sized Lantronix xPico provides simplicity and flexibility making it the easiest and fastest networking-enabling module on the market. 
xPico is an extremely compact networking solution that enables Ethernet connectivity on virtually any device with a serial interface. The included industry-proven Lantronix device server application and full IP stack allow seamless remote access to device data simplifying design integration while providing robust connectivity.
As the smallest embedded device server in the world, xPico can be utilized in designs typically intended for chip solutions. A key difference with the xPico is that there is virtually no need to write a single line of code, translating to a much lower development cost and faster time-to-market.


  • Wireless LAN Interface:
  • IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)
  • IEEE 802.11 d/h/i/j/k/w/r
  • WPS 2.0 support
  • u.FL connector for external antenna
  • Serial Interface:
  • Two Serial CMOS Ports (3.3V, 5V tolerant)
  • 300 to 921.6 Kbps
  • Flow control XON/XOFF, RTS/CTS (SPort 1 only)
  • Lantronix tunneling application (SPort 1 only)
  • Host Interface:
  • Dual Serial Port, SPI, USB 2.0 (device)
  • 8 GPIO
  • Network Protocols:
  • Networking Capabilities:
  • Soft Access Point with DHCP Server
  • Lantronix SmartRoam™ Technology continually tracks Wi-Fi signal strength within range, along with preauthentication and caching resulting in smooth and automatic transition to access points without delay.
  • QuickConnect: Dynamic Profiles facilitate easy and rapid connections to access points
  • Management and Control:
  • Web Server - Landing Page
  • CLI (Serial Monitor Port), Telnet
  • XML import and Export (XCR)
  • Field upgradable firmware (OTA)
  • Security:
  • IEEE 802.11i Support – WPA-Personal, WPA2-Personal
  • 256-bit AES Encryption
  • Architecture:
  • ARM Cortex M3 class processor with on-chip Flash and SRAM
  • 1MB Flash and 128 KB SRAM
  • SPI Flash storage
  • Power:
  • Input Voltage: 3.3VDC
  • Low power consumption of approximately 6µA standby
  • Physical Interface:
  • 40-pin Board-to-Board SMT Connector
  • Environmental:
  • Operating Temp: -40° to +85° C
  • For operation over +70° C a thermal pad is required
  • Storage Temp: -40° to +85° C
  • Relative Humidity: 0% to 90% non-condensing
  • Certifications:
  • FCC Class B, UL and EN EMC, Japan
  • Packaging:
  • Dimensions: 24mm (L) x 16.5mm (W) x 5.64mm (H)
  • Weight: 2.5g
  • Warranty:
  • 5-Year Limited

xPico Resources

Lantronix xPico Product Brief
Lantronix Product Brief
Product Selector Guide - Embedded Modules
Product Selector Guide - Embedded Modules

xPico Products

Loading ...

Previously Viewed Products